16
VM9314
NOTE: You can press and hold to drag the “Source Menu” icons and
rearrange them based on your preference
External Devices
External peripheral devices, including a game console, camcorder, navigation
unit, iPod, Zune, etc. can be connected to this unit via RCA output using the
A/V Media Adapter Cable (included).
Connect the external device to the A/V Media Adapter Cable and then plug the
cable into the
A/V INPUT
connector (6) on the front of the radio. Select “AUX
1” mode to access the front A/V input or “AUX 2” mode for the rear aux input.
You cannot directly control external devices connected to the
A/V INPUT
. For
information regarding the use of USB/SD devices, see “Inserting a USB
Device” or “Accessing an SD Card” on page 46.
Micro SD Slots (for service use only)
The micro SD slot, located behind the monitor, cannot be used for file
playback. This input is for use by service professionals only for software
updates.
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder (1) on the
front panel or press the
VOL-/+
buttons (15, 16) on remote control. When the
volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment
limit has been reached. The LCD or TFT screen displays the volume level for 3
seconds.
EJECT
A / V
INPUT
3.5mm A/V Cable (not included)
Video
Left Audio
Right Audio
Ground
1
2
3
4
Summary of Contents for VM9314
Page 2: ...ii VM9314...
Page 4: ...iv VM9314...
