4
VM9216BT
Wiring Diagram
IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the
installation handled by an experienced technician.
For basic iPod® connectivity, you can use the white 30-pin to USB iPod® cable that came with your Apple device. For
iPod® video or photo playback, you must purchase the jLink-USB cable. Connect the iPod® cable to the rear chassis
iPod® inputs (USB / 3.5mm connectors) and route the iPod® cable to an accessible part of the dash area for easy
connectivity. For occasional iPod® use, keep an iPod® cable in your glove box and use it to connect the iPod® to the
front USB connector.
Harness Cord
Antenna control. Connect this lead
to a motorized antenna turn-on lead.
Maximum current draw 300mA.
External power amplifier control
Antenna Jack
REAR R
FRONT L
FRONT R
REAR L
BLUE
BLUE/WHITE
WHITE/BLACK -
GREEN/BLACK -
WHITE +
GREEN +
PURPLE/BLACK -
GREY/BLACK -
GREY +
Car
Mute (leave open if not connected)
BROWN
Car Phone
FRONT L
FRONT R
REAR R
REAR L
MUTE
P.CONT
ANT.CONT
ACC
GREEN/WHITE
BLACK
YELLOW
RED
FUSE (15A)
Battery
Ignition Switch
Ground
Gearbox
Switch
BATTERY
B
Ground
BATT
ACC
R
GND
PINK
Rear View
Video Camera
YELLOW
External Power Amplifier
Antenna
VIDEO OUT
YELLOW
Rear Video
CAMERA
SUBWOOFER
NAV104 Connector
(optional equipment)
SWC
MICROPHONE
NAV BUS
Steering Wheel Control (SWC)
(Requires PAC SWI-PS Interface Adapter,
Sold Separately)
PRK SW
do
Pi
PARKING BRAKE
External Microphone
SiriusXM
Connector
SXM Bus
Need Help?
For technical assistance, call the Jensen
customer support line at 1-800-323-4815.
128-9183
