6
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Recycle Li-ion batteries. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and
current settings are correct for the battery pack being charged.
Charge batteries on a fireproof surface away from flammable items or liquids.
Batteries should NEVER be left unattended while charging. Only adults should
charge the batteries.
Follow the manufacturer’s instructions for charging the product and do not
charge longer than recommended. Unplug the charger when the battery is
charged or not in use.
NOTE:
These speakers are not magnetically shielded and may cause color distortion
on the screen of some TVs or video monitors. To avoid this, you may need to move
the speakers further away from the TV or monitor if unnatural color shifts or image
distortion occurs.
TURNING THE SPEAKER POWER ON/OFF
Note:
Before first use, please charge the speakers for at least 4 hours because the
batteries may not fully charged, even though the charging LED lights.
1.
In standby mode, tap the POWER button to turn on the unit, the power
button backlight will light up green and begin blinking slowly.
2.
In power on mode, tap the POWER button to turn the unit off, the green
power button backlight turns off.
BLUETOOTH OPERATION
Power on the unit and follow the directions below to use the A2DP profile Bluetooth
features of this unit.
Turn on the Bluetooth
In Bluetooth Off mode, press and hold the Bluetooth button for about 5 seconds until
a beep sound is heard and the Bluetooth button backlight flashes blue.
Note:
Press and hold the Bluetooth button for about 7 seconds to change to
Bluetooth pairing (linking) mode. The Bluetooth button backlight will flash blue
and red.
Turn off the Bluetooth
In Bluetooth ON mode, press and hold the Bluetooth button and hold for about 3
seconds until a beep sound is heard and the Bluetooth button backlight flashes red
and then all lights go off.
