5
LED STATUS INDICATORS
LED Position
Discription
LED Status
No Power
LED Off
Power on
Slow Flashing Green
Power Indicator
Low Battery
Fast Flashing Red
On and working
Slow Flashing Green and Red
Low Battery
Fast Flashing Red
Charging Indicator
(Power On Mode)
Battery Full
Solid Green and Red
No charging
Red LED Off
Charging
Slow Flashing Red
Charging Indicator
(Power Off Mode)
Charging Finished
Solid Red
Off
LED Off
Ready to Link
Blue & Red LED flash alternatively
Not linked
Blue LED flash 2 times per second
Bluetooth Status Indicator
Linked
Blue LED flash every 4 seconds
Remarks
: Fast Flashing - less than 1 second apart.
Slow Flashing - around 3 - 4 seconds apart.
CHARGING INSTRUCTIONS
This unit operates on a built-in Li-ion battery that can be recharged either using the
USB port on your computer or from a USB power adaptor (not included) with a rated
output of DC 5V, 1000mA.
Note:
The DC input jack located on this unit is mainly designed for charging the built-
in Li-ion battery. The unit will still operate normally while charging, but doing
this may reduce the battery life.
CHARGING THE BATTERY
1.) Charge the built-in Li-ion battery a minimum of 4 hours prior to first use.
Plug the unit into a USB port on your computer or into a USB power adaptor
(not included) using the included USB cable.
2.)
Unplug the USB cable from the power source once the battery is fully charged.
3.) After prolonged use, the battery voltage may discharge and operation might
become intermittent. When the internal battery charge is very low, the Red power
button backlight will begin flashing alerting you to recharge the internal battery.
