6
speaker will automatically redial the last number.
Note:
This feature is phone dependent and may not operate on all cell phones.
Re-linking to the cell phone
If your cell phone is already paired (linked) with the SMPS-640, but became unlinked
even with both Bluetooth devices turned on. You can re-link them by:
1. Turning off the SMPS-640 and then turning it on again to re-link your cell phone.
2. You can also re-link the speaker by using Bluetooth operation of your cell phone.
Please refer to operation manual of your cell phone for more information.
LINKING WITH THE NFC
The SMPS-640 features Near Field Communication (NFC), so you can easily pair
and connect the speaker with your compatible Bluetooth device much easier.
If the compatible Bluetooth device you want to link supports NFC, activate the NFC
feature on the device, and touch the
NFC Pairing Area
of the speaker with the NFC
area on your device. The speaker connects to the device automatically. For details on
NFC, see the user guide that came with the Bluetooth device that you are trying to
connect.
Note:
This feature is compatible with Android 4.0 and up. Android 4.0 users will need
to install an App called “tap-and-pair” that is available on Google play.
This feature is phone dependent and may not operate on all cell phones or
devices.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2.
Keep your unit away from heating appliances and sources of electrical noise such
as fluorescent lamps or motors
.
3. Before using, make sure the
Charging Jack Cover
is on and tightly secured.
CLEANING THE UNIT
•
To prevent fire or shock hazard, disconnect your unit from the USB port of power
source when cleaning.
•
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
•
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any
wax or polish sprays on the cabinet.
•
If the cabinet becomes dirty or smudged with fingerprints it may be cleaned with
a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION
:
Never allow any water or other liquids to get inside the unit while
cleaning
.
TROUBLESHOOTING GUIDE
Symptom
Possible Problem
Solution
The USB power adaptor
(not included) is not
plugged into a wall outlet or
the USB cable (included) is
not plugged into the mini
USB jack on the
SMPS-640.
Plug the USB power adaptor (not included)
into a wall outlet and plug the USB cable
(included) into the mini USB jack on the
SMPS-640.
No Charging
Wall outlet is not
functioning.
Plug another device into the same outlet to
confirm the outlet is working.
