Use the arrows on the right to browse through the list and tap any line to highlight it.
You can perform the following operations:
•
Add: you can add a new route point (or a new final destination if the
highlighted item is the last one in the list) after the selected point. The Find
menu opens automatically to let you search for an address, POI, coordinates,
one of your favorite destinations, or select a point from the History list. As soon
as you select any of these, Touch & Go Navigator returns to the Edit screen
and your selection appears right under the highlighted line.
•
Delete: you can delete the selected point from the list. If the highlighted item is
the last one in the list, the previous via point will be promoted to be the final
destination.
•
Optimise: you can optimise the order in which you will drive through the via
points, if there is no specific order you would like to keep. When tapping this
button, Touch & Go Navigator reorders the list instantly to save you time and
fuel. Optimisation is for via points only. Your starting point and destination
remain in their positions, of course.
•
Up and Down: using these buttons you can reorder the list by moving the
highlighted item up or down in the list.
4.7.3.6 Info
This button opens the Route Information screen described in 4.6. This screen shows
information about the current route and has a few additional options to check and
modify your active route.
4.7.4 Main button
The Main button at the bottom right corner leads to the Main menu screen described
in 4.1.
54
