Jensen NAV104 Operating Instructions Manual Download

Page: 15 / 140

NAV104

GETTING STARTED

iGO primo is optimized for in-car use. There is no need to use a stylus. You can use

it easily by tapping the screen buttons and the map with your fingertips.

Accessing the Navigation Software

Press the MENU button and touch the Navigation icon to access navigation mode.

Adjusting the Navigation Voice Volume

While the Navigation is on and a route has been programmed, the Navigation will

speak commands. While the Navigation is speaking, adjust the volume by turning

the radio volume knob. The Navigation volume will remain at this level and when

done speaking will return to the previous source (ie, radio) at the volume level set

for that source.
The main volume must be set above zero in order to hear the spoken directions.

If the radio is muted, the Bluetooth (if equipped) engaged in a call, or the volume

knob has been turned to zero, the navigation will not be heard but your visual

directions will continue.

Selecting / Listening to a Source while Navigating
While navigating, other sources may be selected and listened to such as AM-FM

Tuner, CD, etc. To listen to another source while navigating, press the SRC button

and then select a source from the Source Menu. Navigation voice prompts will be

heard automatically, although the navigation map cannot be seen. To view the

navigation screen, but continue to listen to the selected source, press the NAV/

WIDE button.

Summary of Contents for NAV104













































































































































Search results

Summary of Contents for NAV104

Reviews:

Related manuals for NAV104

Brands by name

Popular brands

Jensen NAV104, Operating Instructions Manual

Search results

Summary of Contents for NAV104

Reviews:

Related manuals for NAV104

Brands by name

Popular brands