Jensen MSR2010 Installation And Operation Manual Download Page 6

Page: 6 / 34

MSR2010

BASIC OPERATION

Power On/Off

Press any button on the front panel to turn the unit on. Press the

POWER

button (1) to turn the

unit off.
•

If a disc is being inserted when the radio power is off and the ACC (accessory switch) is
on, the unit will automatically power up and playback will start.

•

If a CD is present, playback resumes at the last position in memory before the ignition
was turned off or the

POWER

button was pressed.

•

If no CD is present, the unit will resume at the last mode selected (Tuner, Aux, etc.). The

POWER

button is illuminated whenever the IGN lead (red wire) is powered, regardless of

whether the unit is on or off.

Volume Control

To increase the volume, press the

button (2a). To decrease the volume, press the

VOLUME -

button (2b).

Mute

Press the

MUTE

button (17) on the control panel to mute the audio output. Press

MUTE

again

to restore the audio output to the previous level.

Mode

Press the

MODE

button (4) on the control panel to select a different mode of operation, as

indicated on the display panel. Available modes include Tuner, SIRIUS, iPod and AUX In
(optional Auxiliary Input).

NOTE: IPOD or SIRIUS mode will be skipped if the module is not installed.

Reset

The reset button (18) should be activated for the following reasons:
•

initial installation of the unit when all wiring is completed

•

function buttons do not operate

•

error symbol on the display

Use a ball point pin or thin metal object to press the

RESET

button (18). This may be

necessary should the unit display an error code.
You can recover factory default settings using the RESUME function located on the system
menu. With “YES” flashing, press the

MODE

button (4) to activate.

Audio Menu

Press the

AUDIO

button (3) on the control panel to access the audio menu. You can navigate

through the audio menu items by pressing the

AUDIO

button repeatedly. Once the desired

menu item appears on the display, adjust that option by pressing the

VOLUME

+/- buttons (2)

within 5 seconds. The unit will automatically exit the audio menu after five seconds of inactivity.
The following menu items can be adjusted.

Bass Level

Use the

VOLUME

buttons to adjust the Bass level range from “-6” to “+6”.

Treble Level

Use the

VOLUME

buttons to adjust the Treble level range from “-6” to “+6”.

Balance

Use the

VOLUME

buttons to adjust the Balance between the left and right speakers from “L12”

(full left) to “R12” (full right).

Fader

Use the

VOLUME

buttons to adjust the Fader between the rear and front speakers from “R12”

(full rear) to “F12” (full front).

System Menu

Press and hold

the

AUDIO

button (3) for more than 3 seconds to enter the system menu.

“MENU” will appear on the display, followed by the first menu item, “CONTRAST.”

Press the

TUNE/TRK >>|

|<<

button (21, 20) or press the

AUDIO

button repeatedly to

navigate the system menu and select the desired item.

Press the

VOLUME

+/-

buttons (2) to adjust the selected menu item.

Press the

AS/PS

button to return to the previous operation immediately or wait for 5

seconds to return automatically.

The following items can be adjusted:
•

CONTRAST (0 – 10): Set LCD contrast.

•

LOW BATT (ON/OFF): Monitor voltage on ACC line.

•

DISTANT/LOCAL: Select LOCAL for tuner to access local stations whose signals are
much stronger. Select DISTANT to receive all broadcasts in your area.

•

AREA (USA/LATIN/EUROPE/OIRT): Set frequency spacing for various regions.

•

VOL PGM (0 – 46): Select an automatic turn-on volume.

•

BEEP TONE (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons
are selected).

NOTE: Beep tone off will not affect LOW BATT audible tone

•

RESUME: Return the EEPROM to factory default set up values and reset the Sirius Tuner
Settings. "Yes" will blink on the LCD to confirm. Press

MODE

to select.