6
®
MCD 9424JA
Test Speaker Connections
These tests make sure the speakers are connected right. If speakers don’t play at all, both wires
may not be connected. If the wrong speaker plays (you hear front speakers when you expect rear
speakers) make sure you connected the wires right.
Balance
Fader
1. Press SEL four times.
2. Hold the
VOL
button until
the display shows BAL.R 15.
Only the right speakers should
be playing. If not, check the
wiring. Make sure you con-
nected the wires just like the
chart on page 6.
5. Press SEL five times.
6. Hold the
VOL
button until
the display shows
FAD.R 15.
Only the rear speakers should
be playing. If not, check the
wiring. Make sure you con-
nected the wires just like the
chart on page 6.
3. Press SEL four times
again.
4. Hold the
VOL
button until
the display shows BAL.L 15.
Only the left speakers should
be playing. If not, check the
wiring. Make sure you con-
nected the wires just like the
chart on page 6.
7. Press SEL five times again.
8. Hold the
VOL
button until
the display shows FAD.F 15.
Only the front speakers should
be playing. If not, check the
wiring. Make sure you con-
nected the wires just like the
chart on page 6.
7
8
5
6
SEL/
VOL
SEL/
VOL
3
4
1
2
SEL/
VOL
SEL/
VOL
Once everything is operating correctly, perform final installation described on page 7.
5448-EIN.p65
7/23/99, 11:39 AM
6
