2
®
MCD 9424JA
Professional Tip
Before You Begin Installation
Before you begin, you will need tools, supplies and adapters. It is best to make sure you have
everything you need before you take your dashboard apart.
Installation
Tools and Supplies Needed
Basic Installation:
• Flat and Phillips screwdrivers
• Wire cutters
• Wire strippers
• Tools to remove existing radio (screw-
driver, socket wrench set or other tools)
• Electrical tape
Speaker Requirements
Only connect the MCD 9424JA to speakers
rated in the load impedance range of 4 to 8
ohms. Speakers with a load impedance less
than 4 ohms could damage the MCD 9424JA.
Install the MCD 9424JA in a well ventilated
location. Do not install the unit in a closed
box. If the unit is installed without adequate
ventilation, damage could occur due to
overheating.
Important Installation Note
Upgrading Your System
International Jensen makes a wide range
of marine stereo products that will make
your stereo system sound better, great or
INCREDIBLE!
Better Sound
Install a Jensen tape deck or CD player like
you’re doing now. High power units can make
your existing speakers sound better and play
louder.
Great Sound
Replace your existing speakers with Jensen
Marine speakers.
INCREDIBLE Sound
Jensen offers a full line of amplifiers, high-
power speakers and subwoofers that can turn
your boat into audio dynamite. You can go
loud, louder and loudest by selecting Jensen
components from your retailer.
COM
PAC
T
DIGITAL AUDIO
®
ST
SHUFFLE
SHUFFLE
CH
OPEN
MCD-9424JA
8 X O
VERSAM
PLING
• 4 X 25W
ATTS
W2 2
LOUD
W1 1
RPT 4
W3 3
SCN 6
SHF
5
DISP
PWR
WB
VOL
VOL
AS/PS
BAND
SEL/
5448-EIN.p65
7/23/99, 11:39 AM
2
