background image

MCD5060

2

SAFETY INFORMATION

When Driving

Keep the volume level Iow enough to be aware of the road and traffic conditions.

Protect from Water

Do not expose the product directly to water, as this can cause electrical shorts, fire or other 

damage.

Protect from High Temperatures

Exposure to direct sunlight for an extended period of time can produce very high temperatures 

inside your vehicle. Give the interior a chance to cool down before starting playback. 
Do not mount radio within close proximity of engine compartment.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC negative ground battery system.

Protect the Disc Mechanism

Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or 

permanent damage due to the precise mechanism of this unit.

CAUTION:

THIS MOBILE CD PLAYER IS A CLASS I LASER PRODUCT. THIS UNIT USES A VISIBLE/

INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION IF EXPOSED 

DIRECTLY. BE SURE TO OPERATE THE MOBILE CD PLAYER AS INSTRUCTED. 
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER 

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION 

EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER 

SERVICING TO A QUALIFIED TECHNICIAN.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

EQUIPMENT DIRECTLY TO WATER. 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND INTERFERENCE, USE 

ONLY THE RECOMMENDED ACCESSORIES. 

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

DISC NOTES

Compatible Disc Types

NOTE: CD-R and CD-RW discs will not play unless the recording session is closed and 
the CD is finalized.

Disc Maintenance

A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe 

the disc using a clean cloth, working from the center hole towards the outside edge. 

Never use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent.

Be sure to use only round CDs for this unit and do not use any special shape CDs. Use of 

special shape CDs may cause the unit to malfunction.

Do not stick paper or tape on the disc. Do not use CDs with labels or stickers attached or 

that have sticky residue from removed stickers.

Do not expose discs to direct sunlight or heat sources such as hot air-ducts, or leave them 

in a vehicle parked in direct sunlight where there can be a considerable rise in 

temperature inside the vehicle.

NOTE: A disc may become scratched (although not enough to make it unusable) 
depending on how you handle it and other conditions in the usage environment. These 
scratches are not an indication of a problem with the player.

Table 1: General Disc Information

Disc Type

Logo

Diameter/

Playable Sides

Playback Time

Audio CD

12 cm single side

74 minutes

REWRITABLE

RECORDABLE

Insert label

Do not bend.

Never touch
the under side
of the disc.

Wipe clean from 
the center to the
edge.

side up.

Summary of Contents for MCD5060











Reviews: