Jensen JWM30, Installation And Owner'S Manual, Page: 6 / 16

BASIC OPERATION
Power
Zones Volume Control
Audio Menu Setting
Pause/Mute
Liquid Crystal Display (LCD)
System menu setting
Press the POWER button (1) turn the unit on. The unit will resume at the last
mode (Tuner, Aux, etc.) after turn on.
Press and hold the POWER button (1) to enter standby mode.
This function will time out after five seconds of inactivity and the unit will
resume normal operation.
Press the button (8) to silence the audio output in tuner, BT, USB, HDMI In, TV
AUDIO or Auxiliary Input mode. Press again to restore the previous volume level.
The liquid crystal display (LCD) panel (23) displays the frequency, time and activated
functions.
Press the
POWER button (1) to turn the dimmer On (selected brightness level) and
press again to turn dimmer Off (maximum brightness level)
1. Press and hold the SETUP button (20) to enter the system menu.
2. Press SETUP button or press the or ( 7,9) to choose the following
system menu list.
3. Once the desired menu item appears on the display, adjust that option by rotating
the volume encoder knob clockwise or counter-clockwise within 5 seconds.
4. Press the
ENTER knob button (22) to confirm your selection and exit system menu.
The unit will automatically exit the system menu after 5 seconds of inactivity.
Press the VOL/ENTER button (22) to select the Zone AB or Zone C volume
control.
Rotate the
VOL/ENTER encoder knob control clockwise to increase or
counter- clockwise to decrease the volume output for selected zone.
The maximum volume setting is “40”. While adjusting the volume, the LCD
displays numerical representation of the level.
Press the SETUP button (20) to step through the following audio adjustment
options.
Rotate the
VOL/ENTER encoder knob control to adjust the selected audio
feature.
Ÿ
BAL: Adjust the speaker output balance between "L7" (left) and "R7" (right).
“BAL 0" indicates an equal balance between the left and right speakers.
Ÿ
LOUDNESS: Toggle the loudness on/off. When listening to music at low
volumes, this feature will boost the bass/treble range to compensate for the
characteristics of human hearing.
6
JWM
30
NOTE: When subjected to cold temperatures for an extended period of time,
LCD panels will take longer to illuminate and the display visibility may slightly
decrease. Optimal LCD operation will return to normal when the temperature
increases to a normal range.
The following system menu items can be adjusted:
Ÿ
Bluetooth Device (Locked/Unlocked, Disconnect/Connect, Delete): view, lock
and delete from a list of previously paired mobile device models.
Ÿ
Bluetooth Pair: Press “ ENTER ” knob to automatically pair a device.
NOTE: When active zone mode in Zone AB, the “BT1 DEV” or “BT1 PAIR” setting
menu items are adjustable in setting menu
.
When Zone C selected to individual BT mode, and active zone in Zone C, the
“BT2 DEV” or “BT2 PAIR” items are adjustable in setting menu.
Ÿ
DIM On/Off: Turn the dimmer on (selected brightness level) or turn dimmer off
(maximum brightness level).
Ÿ
LCD Brightness: Adjust the brightness of the LCD backlight from “DIM 0” (off) to
“DIM 8”.
The following audio menu items can be adjusted:
Ÿ
BAS: Adjust the Bass level from "-7" to "+7".
Ÿ
TRE: Adjust the treble from "-7" to "+7".
10
1
20
22
21
2 3 4 5 6 7 8 9
19 18 17 16 15 14 13 12
11
24
23