LISTENING TO THE RADIO
1. Tap
the /SLEEP button (#1) to turn on the JWM-160.
2. Tap the BAND/BT button (#2) to select FM or AM mode, the radio frequency will show on
LCD Display (#11).
3. Press and hold the
button (#5) or
button (#7) to search for the next / previous
available station. If the reception is poor, try Manual Tuning to fine-tune the station.
4. Press
the button (#5) or
button (#7) briefly to manually tune through the
frequency band.
5. Adjust the button (#9) or VOLume – button (#8) to the desired volume level.
6. If no button is pressed for 5 seconds in radio mode, the display will change to show
current time. You can tap the
button (#5) or
button (#7) to check the tuned
frequency.
7. Tape
the /SLEEP button (#1) to turn the unit into Standby mode after listening.
TIPS FOR BEST RADIO RECEPTION:
The AM and FM antenna are located inside the cabinet of the unit. If reception is weak,
change the position of the unit until the internal antenna picks up the strongest signal.
Setting the Radio Station Presets
The JWM-160 allows you to store up to 10 FM stations and 10 AM stations for easy recall at
any time.
1. Tap the /SLEEP button (#1) to turn on the JWM-160.
2. Tap the BAND/BT button (#2) to select FM or AM mode, the radio frequency will show on
LCD Display (#11)..
3. Tune to the radio station you want to store in memory.
4. Press and hold the TIME SET/MEM button (#3). The preset channel number “P01” will be
flashing on display
.
5. Tap the
button (#5) or
button (#7) to select the preset number (P01-P10).
6. Tap the TIME SET/MEM button (#3) to confirm.
7.
To store up to 10 station presets, repeat steps 3 to 6 above.
RECALLING PRESET MEMORY CHANNELS
To recall a preset station,
1. In radio mode, tap the PRESET TIME SET/MEM button (#3), the preset number will
appear on display.
2. Tap the TIME SET/MEM button (#3) repeatedly to select the preset channel.
BLUETOOTH OPERATION
