13
The following procedure can be accomplished by using the remote and main controls on the unit.
PLAYING COMPACT DISC AT
The system is equipped with 2 CD players, below are the functions for
.
GETTING STARTED
1. Press the “POWER /STANDBY” button to turn on the unit.
2. Tap the “FUNCTION” button repeatedly to select “CD-1“ mode, no disk message “NO” will
appear on display.
Note
: The display will show a “busy” message for few seconds when you change the mode
pass through CD-2 mode. Wait until the “busy” message disappears from display and
the CD-1 mode shows on display.
3. Press the ”Open/Close
” button on the unit front panel to open the CD tray.
4. Place a CD with the printed side facing up inside the tray and then press the
button to
close the CD tray.
5. After the CD is read, the LCD display shows the total number of tracks for a second and then
start to play track 1 automatically. The LCD display will show the current track number and
elapsed time alternatively.
If a CD is not recognized by the player or if no disc is loaded, the
display will show “NO“.
NOTES:
- Keep the CD disc tray closed when the system is not in use to prevent dirt and dust
from entering the CD mechanism.
- Never place more than one CD in the CD tray. If two discs are loaded at the same
time, the CD mechanism may jam and / or the discs themselves may be damaged.
- Never push on the CD door to close it. Always press the ”OPEN/CLOSE
”
button on the
unit front panel to open and close the CD tray
PLAY / PAUSE MODE
1. If “PLAY/PAUSE
”
button is pressed during stop mode, the first track will be played .
2. If “PLAY/PAUSE
”
button is pressed during playback, system go to pause mode and the
play indicator “ “ will start flashing at the LCD display. Press the button again to resume
normal playback.
3. Adjust the volume to the desired level.
STOP MODE
If “Stop
”
button is pressed during play or pause mode, the system will enter stop mode and
display the total number of tracks on the LCD display.
SKIP MODE (SKIP UP
/SKIP DOWN
)
1. During play or pause mode, if “TUNE/
”
button is tapped it will go to next track and display
the track number and remain in either the PLAY or PAUSE mode.
2. During play or pause mode, if “
/
TUNE
”
button is tapped, it will go back to the beginning of
the track, the same track number is display and remain in the PLAY or PAUSE mode.
3. After step 2, tap the “
/
TUNE
”
button again, it will go to the previous track and remain in the
PLAY or PAUSE mode.
4. During play mode, press and hold the “TUNE/
”
or “
/
TUNE
”
button to search within the
current track with audible high speed playback.
