E-6
ANTI-SHOCK LOCK DOWN SCREW
IMPORTANT:
This turntable features a built in Anti-Shock system, and the turntable is
locked down when shipped from the factory. Rotate the ANTI-SHOCK LOCK DOWN
SCREW
(#2), in a clockwise direction to release the turntable and activate the anti-shock
feature before using the turntable.
STEREO PHONOGRAPH OPERATION
Please Note - Before Use
-
Remove the stylus protector.
-
Make sure the BLUETOOTH BUTTON (#8) is in the up
(OFF) position
-
Make sure that the tone arm is unlocked and free to
move from the tone arm rest prior to operating. Lock
the tone arm again when not in use.
1. Raise the JTA-455 DUST COVER (#1).
2. Rotate the POWER ON/OFF AND VOLUME CONTROL KNOB (#7) clockwise to turn
on the JTA-455
3. Place the record on the platter [use the 45 RPM ADAPTER (#3)
if you are playing 45 RPM records].
4. Set the 33/45/78 RPM SPEED SELECTOR (#5) to the proper
position for the record you are playing.
5. Lift the tone arm from the rest and slowly move it over the record..
The turntable platter will begin turning.
6. Place the tone arm down onto the record at the location that you
want to play.
7. Adjust the POWER ON/OFF AND VOLUME CONTROL KNOB (#7) to the desired
level.
8. At the end of record, the platter will automatically stop rotating. Lift the tone arm
from the record and return it to the rest.
9. To stop playing manually, lift the Tone Arm up from the record and return it to the
arm rest.
Remark
: Certain records may have an auto-stop area outside the unit setting, so it will
stop before the last track finishes. When this happens, set the auto-stop switch (#13) to
the “ off “ position. This will disable the auto-stop feature, and the record will run to the
end of the record but will not automatically stop. Place the tone arm back in the rest
position.
BLUETOOTH CONNECTION
Pairing the turntable with a new Bluetooth speaker system:
1. Turn on your Bluetooth speaker system and place it in pairing/search mode.
2. Rotate the POWER/VOLUME ON/OFF SWITCH (#7) clockwise to turn on the
JTA-455. The Bluetooth LED indicator (#9) will start slowly flashing (1 time/second),
indicating the Bluetooth transmitter is now in searching/connecting mode. The
JTA-455 will remain in this searching mode for around 30 seconds. If the JTA-455
Bluetooth transmitter cannot find any previously paired Bluetooth speakers, it will
enter pairing mode and the Bluetooth LED indicator (#9) will begin flashing at a
faster rate (2 times/second). The new Bluetooth speaker system will be paired
automatically. If pairing is unsuccessful, the JTA-455 will return to standby mode
automatically and the Bluetooth LED indicator (#9) will begin flashing slowly (1 time
every 5 seconds).
