background image

Radio Mode

USA/Europe (EURO) Tuning Mode Selection

To change from USA to European tuning mode, perform the following steps:
1. 

Press and hold the       button (9) for 3 seconds to access the system menu.

2. 

Press the       button (9) repeatedly to cycle through the menu options (DIM>DIM LEVEL>REGION>PRE VOL>RESET). 

3. 

The Region setting will display REG USA (if set to USA frequency tuning mode) or REG EUR (if set to European 

          frequency mode).
4. 

With the display showing the current tuning mode, Press the       or       buttons (11, 10) to change between (REG USA / 

          REG EUR). 
5. 

Press       button (13) to confirm your selection and exit menu.

Frequency Tuning

Press the        or        buttons (11, 10) to fine tune the radio frequency.

Channel Seek

Press and hold the        or        buttons (11, 10) to seek strong radio frequencies.

Favourite Preset Channel Select

Press the       button (8) to select available preset channels.

Favourite Preset Channel Store

To manually store a favourite channel to one of the twelve preset channels, perform the following steps:
1. 

Press the        or        buttons (11, 10) tune to the radio frequency you want to store.

2. 

Press and hole the favourite       button (8) to access twelve preset channels list; the favourite icon & channel        will be 

          flashing on display. 
3. 

Press       button (8) repeatedly to select desired favourite preset channel number (1-12). 

4. 

Press       button (13) to save the station to the chosen preset channel and exit preset channel list, the favourite icon will 

          stop flashing.  

Auto Store

Press and hold the 

 button (2) when is in AM mode or press 

 button (3) when is in FM mode to access the tuner menu 

AM

FM

list  (AUTO  STORE  &  PRESET  SCAN).  Press 

  button  (2)  or 

  button  (3)  repeatedly  until  “AUTO  STR”  appears  on  the 

AM

FM

display. Press the     button (13) to begin the Auto Store function and store the strongest stations to the preset tuning channels. 

NOTE: Only stations detected with sufficient signal strength will be stored in the preset channels automatically.

Preset Scan

Press and hold the 

 button (2) when is in AM mode or press 

 button (3) when is in FM mode to access the tuner menu 

AM

FM

list  (AUTO  STORE  &  PRESET  SCAN).  Press 

  button  (2)  or 

  button  (3)  repeatedly  until  “PRE  SCAN”  appears  on  the 

AM

FM

display.  Press  the          button  (13)  to  begin  the  Preset  Scan  function  and  listen  the  strongest  stations  to  the  preset  tuning 
channels. 

Weather Band Mode

Accessing the Weather Band

1. 

Press the 

 button (4) to enter Weather Band mode. 

WX

2. 

Press the       button (8) to select Weather Band preset stations or press the        or        buttons (11, 10) to tune to 

          previous or next frequency.
3. 

Press and hold the        or        buttons (11, 10) to seek stronger weather band radio frequencies.

What is the NOAA Weather Radio?

NOAA  is  a  nationwide  system  that  broadcasts  local  weather  emergency  information  24  hours  a  day.  The  U.S.  network  has 
more than 530 stations covering the 50 states, as well as the adjacent coastal waters, Puerto Rico, the U.S. Virgin Islands and 
the  U.S.  Pacific  Territories.  Each  local  area  has  its  own  transmitting  station  and  there  are  a  total  of  seven  broadcasting 
frequencies  used:  162.400MHz  (CH2),  162.425MHz  (CH4),  162.450MHz  (CH5),  162.475MHz  (CH3),  162.500MHz  (CH6), 
162.525MHz (CH7) and 162.550MHz (CH1).

How many stations can I expect to receive?

Since the broadcasts pertain to local weather and information, the transmission power is usually very low (much less than AM 
or  FM  stations)  which  means  you  will  usually  receive  only  one  station  unless  you  are  on  the  edge  of  two  or  more  broadcast 
signals. The most you will receive is two or three, and that is rare.

Is it possible I won't receive any stations?

Depending on location, it's possible to receive a very weak signal or none at all. Also, similar to AM and FM signals, weather 
band signals are subject to surrounding conditions, weather, obstructions of the signal by hills or mountains, etc. If no NOAA 
signals are found, the tuner will scan all seven NOAA frequencies every 30 seconds.

NOAA Weather Alert

The Weather Alert function adds an additional level of user safety by automatically switching from the current function mode to 
weather band mode for a minimum of 60 seconds if a NOAA warning tone (1050 Hz) is received. If no additional warning tone 
is received for 60 seconds, the unit will switch back to the last known function mode.

7

 

JMS4

Summary of Contents for JMS4















Reviews: