D. RECORDING FROM PHONO
z
Press the “PHONO” function button.
z
Place a record onto turntable and insert a blank cassette tape into deck A.
z
Press the “ PAUSE ” key and then press the “ RECORD ” and “ PLAY ” key at deck A.
z
Place tone arm to start playback the record and then release “ PAUSE ” key at deck A to start
dubbing.
z
Press “ PAUSE ” or “ STOP ” key at deck A when finish.
MORE FEATURES
A. SLEEP TIMER SETTING
1. Press and hold the “ SLEEP/TIMER ” button on main unit or “SLEEP” button on remote, to
active and adjust the sleep timer in the order of 90 > 80 >70….10 minutes automatically.
Release the button at sleep timer you want to select.
2. System will stop and go to STANDBY mode automatically after the selected timing.
3. To cancel the sleep mode, press the “SLEEP/TIMER” button on main unit or “SLEEP” on the
remote once, “ SLEEP ” indicator on the display disappears.
B. ON/OFF TIMER SETTING (BY REMOTE ONLY)
This function allows the system to turn on automatically and wake you up by soft CD music or
with the radio and shut itself off (standby mode) when time is up.
1. In unit standby mode, press the “ MODE ” button on remote once, the LCD display will show
“ ON” timer icon and flashing.
2. Press “ MEM/CLOCK-ADJ ” button and then “ SKIP UP/ DOWN ” to set the hour.
3. Press “ MEM/CLOCK-ADJ “ button to confirm. Minute digits are flashing and prompt for
input.
4. Press the “SKIP UP/ DOWN “ button to set the minute.
5. Press “ MODE ” button to store the timer starting time. “ OFF” timer will appear and
flashing.
6. Follow above step 2-4 to set OFF timer.
7. Press the “MODE” button to confirm, “
” icon flash and timer source
CD/PHONO/TUNER/TAPE appears on the display.
8. Press the “ MEM/CLOCK-ADJ ” button once, timer source flashing.
9. Press the “ SKIP UP/ DOWN ” to set source to be controlled by timer and then press the
“MODE” button to finish.
10. You can press the “ MODE ” button repeatedly to review the presets time in order.
NOTE
: 1. The timer setting will automatically cancel if no button is being pressed in a period
of about 10 seconds.
2. If you set ON/OFF timer for PHONO or TAPE, please make sure record or
pre-recorded tape is installed and tone arm or cassette PLAY key is set and ready
to play.
z
ACTIVE/DE-ACTIVE TIMER FUNCTION
1. To active the ON/OFF timer, press the “ SLEEP/TIMER ” button on main unit or “TIMER”
button on remote once, the timer indicator
is shown on LCD
2. To cancel ON/OFF timer function, press again “SLEEP/TIMER” button until the timer
indicator “
” disappear
16