Jensen JMC-1100, Owner'S Manual, Page: 14 / 24

2. You can also press either the “ DISC 1”, “ DISC 2 ”, “ DISC 3 ” buttons to start playing a
specific disc in the tray.
3. To interrupt, press the “ PLAY/PAUSE ” button once, and the display will start flashing. Press
again to resume playback.
z
STOP MODE
1. If “STOP” button is pressed during PLAY or PAUSE, the system will go into stop mode.
z SKIP MODE (SKIP UP /SKIP DOWN )
1. During PLAY or PAUSE mode, if “SKIP +” button is pressed, the player will go to next track
and display the track no. and then remain the PLAY or PAUSE mode.
2. During PLAY or PAUSE mode, if “SKIP -” button pressed, the player will go back to the
beginning of the track.
3. After step 2, pressing “SKIP -” button again will go to the previous track.
z SEARCH MODE (SEARCH UP /SEARCH DOWN )
1. During PLAY mode, if “” button is pressed & held for few seconds, it will start
searching forward.
2. During play mode, if “SEARCH -” button is pressed & held for few seconds, it will start
searching backwards.
z REPEAT PLAY
This function allows you to repeat 1 single track, 1 single disc or all discs:-
Press the “REPEAT” button repeatedly to switch the function:-
REP. ALL DISC REP. 1 DISC REP. 1 TRACK
REP. OFF
Note : Single track repeat function is possible in normal or programmed playback, repeat one
disc or all discs is only available in normal playback.
z
RANDOM PLAY
You can listen all the tracks of all available discs in a random order by using this function
1. Press “RANDOM” button once and the unit will play all discs randomly; press again and the
unit will play 1 disc randomly.
2. Press “PLAY/PAUSE” button to start random playback.
3. All tracks of all the discs or all tracks of 1 disc will be played in random order.
4. Press “RANDOM” button again to cancel random mode.
z INTRO PLAY (BY REMOTE ONLY)
You can listen to the beginning (10 seconds) of each track of a CD with this function & save time
searching for a song.
1. Press “INTRO” button after placing a CD inside the unit
2. System starts playing the first 10 seconds of each track of the entire CD continuously.
3. Press “INTRO” button once again when it reach your desired track for normal playback.
z REMAIN FUNCTION (BY REMOTE ONLY)
In CD playback mode, press to check the remain time on LCD display during CD playback
Press “REMAIN” button repeatedly to switch the function as below:
TRACK PLAYING TIME TRACK REMAINING TIME DISC REMAINING TIME DISC PLAYING TIME
13