Jensen JiLS-525iB, User Manual

Page: 15 / 24

13
PAIRING (LINKING) A BLUETOOTH ENABLED CELL PHONE OR OTHER BLUETOOTH
ENABLED DEVICE to the JiLS-525iB.
1. With the power on, tap the FUNCTION button repeatedly to select Bluetooth mode. The
LED display will show “bt” and blink for about 10 minutes The JiLS-525iB is ready to pair
(link) with your Bluetooth device.
2. Turn on the Bluetooth feature of your cell phone and enable the search or scan feature to
find the JiLS-525iB.
3. Select " JiLS-525iB " from the device list when it appears on your device screen. If
required, enter the pass code “0000” to pair (link) the JiLS-525iB with your cell phone.
4. After successfully pairing (linking) your cell phone with the JiLS-525iB, the LED display
will change to show “bt” steadily for few seconds then show current clock. You can play
music from your cell phone wirelessly to the JiLS-525iB.
Note: If you want to connect the JiLS-525iB to another cell phone after pairing
successfully, then you need to turn off the Bluetooth on the paired cell phone
first if it is in range before going through the above steps. Otherwise, the JiLS-
525iB will automatically reconnected to previously linked cell phone.
5. Press the /- button to adjust the desired volume level.
6. To turn off the JiLS-525iB Bluetooth, tap the POWER button on remote control or press
and hold the button on main unit to turn the unit to standby mode. Don’t forget to also
turn off the Bluetooth feature on your cell phone.
Notes:
1.) Refer to manual of your cell phone or other Bluetooth enabled device for Bluetooth
operation, since it may vary from model to model.
2.) Pairing mode will be canceled and unit will be turned to Standby mode if pairing is
unsuccessful within 10 minutes.
3.) If your Bluetooth enabled device does not support A2DP, it will not play the music
through the speaker, even after it's paired (linked).
4.) If you are pairing (linking) your computer to the JiLS-525iB using Bluetooth, you may
need to set the JiLS-525iB as your computer’s default sound device.
BLUETOOTH OPERATION
PLAYBACK MUSIC ON YOUR BLUETOOTH DEVICE
1. Tap the POWER button to turn on the unit.
2. Turn on Bluetooth of your cell phone or device which has been successful pairing with
JiLS-525iB before, press the FUNCTION button to select Bluetooth mode, the “bt”
message appears on the LED display and blinking.
3. After the Bluetooth device is connected with the JiLS-525iB, tap the PLAY/PAUSE
button to start playback music in your cell phone or Bluetooth device.
4. Tap the PLAY/PAUSE button to pause or resume playback.
5. Press the /- button to adjust your desired volume level.
6. Tap the or button on the remote control or main unit to select the desire music
track. Press and hold the or : button on the remote or main unit for fast-rewinding
or fast-forwarding during playback.
7. Tap the POWER button on remote control or press hold the button on main unit to
turn off the unit after listening.