9
• Reset System Defaults: Press the
ENTER/TIMER
button and
Press or buttons to select Confirm. Press the
ENTER/
TIMER
to return the unit to factory default set up values.
• System Info: Display firmware version
NOTE: Bluetooth Device menu options are only available
while the Bluetooth feature is ON and the radio is in Bluetooth
Audio mode.
NOTE: A locked Bluetooth device will not be overwritten from
the list.
Low Voltage Alarm Operation
If Low Voltage Alarm is set to “On”, an alarm will sound (8
beeps every 30 sec) when the voltage drops to 10.5V (+/-
0.3V). A visual warning (LOW VOLTAGE) will appear, Press any
button to dismiss visual warning, (reappear every 10-minutes)
in the LCD display.
NOTE: “Off” is the default setting for Low Voltage Alarm. If the
audio is muted or the volume is set to 0, the audible beep will
not be heard.
Liquid Crystal Display (LCD)
The liquid crystal display (LCD) panel (3) displays the
frequency, time and activated functions.
Press the
POWER
button (1) to turn the dimmer On (selected
brightness level) and press again to turn dimmer Off
(maximum brightness level).
NOTE: LCD panels may take longer to respond when subjected
to cold temperatures for an extended period of time. In
addition, the visibility of the characters on the LCD may
decrease slightly. The LCD display will return to normal when
the temperature increases to a normal range.
Setting the Clock
To set the clock to display the current time, turn the vehicle
ignition on and turn the radio on. Enter the system menu and
adjust the clock by selecting the “Set Clock” menu item.
• Press
ENTER/TIMER
button (4) to enter clock setting
menu.
• press or to select hours, minutes, or 12/24 hour format.
• Press or to adjust the setting field.
When no adjustment is made, the time will become set and
normal operation will resume.
Setting Work Timer
To activate the work timer clock and running in the
background,
• Press
ENTER/TIMER
button (4) to display work timer.
• Press
ENTER/TIMER
button again to start/stop work timer.
• Press & hold
ENTER/TIMER
button to reset work timer.
• Press
RETURN
button (5) to exit work timer display.
If timer is exited while running, “TIMER” flashed every 10
seconds for 2 seconds in place of clock in footer right on the
display.
