Jensen JCR-375, User Manual

Page: 9 / 17

E-8
ALARM OPERATION
The unit features a dual alarm clock.
Setting the alarms:
1. In standby mode, press and hold the ALARM 1 BUTTON (#1), The ALARM 1 INDICATOR
(#s15) and the wake up option will flash on the LED DISPLAY (#18) to prompt for input.
2. Tap the BUTTON (#13) or BUTTON (#12) to select the wake up option (Cd-CD,
bb-ALARM, tune-FM RADIO).
3. Tap the ALARM 1 BUTTON (#1) to confirm the selected wake up option. T he hour digits
of the clock display begin to flash.
Note: The frequency show on the LED DISPLAY (#18) when wake to tune-FM RADIO is
selected.
Tap the BUTTON (#13) or BUTTON (#12) to select the preset frequency.
4. Tap the BUTTON (#13) or BUTTON (#12) to set the hour.
Press and hold the buttons for fast advance/reverse setting.
Note: Make sure the correct AM or PM time is selected when
setting the hour.
5. Tap the ALARM 1 BUTTON (#1) to confirm the hour setting.
The minute digits will flash to prompt for input.
6. Tap the BUTTON (#13) or BUTTON (#12) to set the
minute. Press and hold the buttons for fast advance/reverse
setting.
7. Tap the ALARM 1 BUTTON (#1) to confirm the minute setting.
The volume level UXX will flash to prompt for input. Tap the
BUTTON (#13) or BUTTON (#12) to set the suitable volume
level.
(Remark: Wake to bb-ALARM volume level is preset and no need to set.)
8. Tap the ALARM 1 BUTTON (#1) to confirm and complete the ALARM 1 setting.
9. Setting the ALARM 2 time uses the same steps above, but using the ALARM 2 BUTTON
(#2) in place of the ALARM 1 BUTTON (#1)
Note: The unit will not save the settings and return to Standby mode if you do not tap any
button within 10 seconds.
Wake to music from CD – Turning the wake to CD on:
The CD will automatically turn on when the alarm time is reached. The corresponding
ALARM 1 INDICATOR (#15) or ALARM 2 INDICATOR (#16) will flash .
The unit will start playing the CD when the wake time is reached, so make sure the CD is
inserted and can be properly played, otherwise the unit will default to the alarm sound
automatically.
Press the SNOOZE BUTTON (#7) to temporarily turn off the CD player, or POWER
BUTTON (#6) to turn the alarm off.
If no buttons are pressed when the radio is playing, it will continue playing for 60 minutes and
then turn off automatically.
Waking to Alarm - Turning wake to ALARM on:
•
A beeping Alarm will automatically turn on when the alarm time is reached. The
corresponding ALARM 1 INDICATOR (#15) or ALARM 2 INDICATOR (#16) will flash.
•
Press the SNOOZE BUTTON (#7) to temporarily turn off the alarm, or POWER
BUTTON (#6) to turn the alarm off.