background image

 

 

E-9

If no buttons are pressed when the alarm is sounding, it will continue sounding for 60 minutes 
and then turn off automatically. 
 

Wake to Radio - Turning the wake to RADIO on: 

 

The Radio will automatically turn on when the alarm time is reached. The corresponding 

ALARM 1 INDICATOR (#15) or ALARM 2 INDICATOR (#16) will flash

.

 

 

The unit will turn on to the FM radio station you selected to when the wake time is reached, 
so make sure the station is set to the one you 

want to wake up to

.

 

 

Press the SNOOZE BUTTON (#7) to temporarily turn off the radio, or press POWER    
BUTTON (#6) to turn the alarm off.  

If no buttons are pressed when the radio is playing, it will continue playing for 60 minutes and 
then turn off automatically. 
 

Review the Alarm settings:  

1.  In standby mode, press and hold the ALARM 1 BUTTON (#1), The ALARM 1 INDICATOR 

(#15) and the wake up option will flash. 

Note: The frequency show on the LED DISPLAY (#18) when wake to tune-FM RADIO is 

selected.

 

2.  Tap the ALARM 1 BUTTON (#1) to check the hour of the alarm time. 
3.  Tap the ALARM 1 BUTTON (#1) to check the minute of the alarm time. 
4.  Tap the ALARM 1 BUTTON (#1) again to check volume level. 
5.  Tap the ALARM 1 BUTTON (#1) again return to standby mode. 
6.  Review the ALARM 2 setting uses the same steps above, but using the ALARM 2 

BUTTON (#2) in place of the ALARM 1 BUTTON (#1). 

 

Turning the alarms ON and OFF:  

1.  In Standby mode, tap the ALARM 1 BUTTON (#1) to turn on Alarm 1. The ALARM 1 

INDICATOR (#15) on the LED DISPLAY (#18) will turn on. The alarm time and then the 
wake up option will show on the display. 

2.  Tap the ALARM 1 BUTTON (#1) again to turn off the Alarm 1. The ALARM 1 INDICATOR 

(#15) will be turned off.  

3.  Turning Alarm 2 on/off will uses the same steps above, but using the ALARM 2 BUTTON 

(#2) in place of the ALARM 1 BUTTON (#1). 

 
 

SNOOZE FUNCTION 

 

When the alarm sounds, tap the SNOOZE BUTTON (#7) to temporarily turn off the alarm and 
activate the snooze function. The alarm will stop and turn on again 9 minutes later. This can 
be repeated when the alarm sounds again within 60 minutes. 

 

Notes: 

 The corresponding ALARM 1 INDICATOR (#15) or ALARM 2 INDICATOR (#16) will 

flash 

during the snooze period. 

 To cancel the snooze period and the alarm, press the POWER   BUTTON (6). 

 
 
 
 
 
 

Summary of Contents for JCR-375


















Reviews: