Jensen JCR-350, User Manual

Page: 8 / 13

E-7
SETTING THE TIME
NOTE:
When the unit is plugged in for the first time, the display will be flashing
12:00AM and will continue flashing until the time is set.
Setting the Time
1. In standby mode, Press and hold the TIME BUTTON (#7) until the unit goes into
TIME SET mode. T he hour digits will begin flashing.
2. Repeatedly tap the BUTTON (#8) or VOLUME - BUTTON (#11) to set
the hour. Press and hold the volume buttons to speed up advancing up or down
through the hour digits.
Note:
The PM indicator in the top left corner of the LCD DISPLAY (#16) will light
when the hour is set to PM and will be off when the hour is set to AM.
3. Tap the TIME BUTTON (#7) to confirm the hour setting, and the minute digits will
begin flashing.
Repeatedly tap the BUTTON (#8) or VOLUME - BUTTON (#11) to set
the minutes. Press and hold the volume buttons to speed up advancing up or down
through the minute digits.
4. Tap the TIME BUTTON (#7) to confirm the minutes and complete setting the time.
The display will stop flashing.
Note:
The unit will automatically save the current settings and exit the TIME SET mode if no
buttons are pressed within 5 seconds during the set-up process.
ALARM OPERATION
The JCR-350 features a dual alarm clock.
Turning the alarms On and Off
Tap the ALARM 1 BUTTON (#9) to turn ON the Alarm 1, the Alarm 1 icon
will
appear on the display and the alarm time will flash on the display for 5 seconds. Tap
the ALARM 1 BUTTON (#9) again to turn Alarm 1 OFF. The Alarm 1 icon
will turn
off.
Repeat the steps above for Alarm 2 using the ALARM 2 BUTTON (#10).
Setting the alarm time:
1. Press and hold the ALARM 1 BUTTON (#9), until the unit goes into ALARM SET
mode. T he hour digits will begin flashing and the Alarm 1 icon
will appear on the
display.
2. Repeatedly tap the BUTTON (#8) or VOLUME - BUTTON (#11) to set
the hour. Press and hold the volume buttons to speed up advancing up or down
through the hour digits.
3.
Note:
The PM indicator in the top left corner of the LCD DISPLAY (#16) will light
when the hour is set to PM and will be off when the hour is set to AM.
4. Tap the ALARM 1 BUTTON (#9) to confirm the hour setting, and the minute digits
will begin flashing.
5. Repeatedly tap the BUTTON (#8) or VOLUME - BUTTON (#11) to set
the minutes. Press and hold the volume buttons to speed up advancing up or down
through the minute digits.
6. Tap the ALARM 1 BUTTON (#9) to confirm the minutes and complete setting the
Alarm 1 time. The display will stop flashing and the alarm sound source will flash
on the display.