-
If the automatic tuning does not stop on the exact frequency of the station, for
example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning
method to “fine tune” to the exact frequency of the desired station.
TIPS FOR BEST RADIO RECEPTION
AM - The AM antenna is built inside the radio. If AM reception is weak, change the
position of the unit until the internal antenna picks up the strongest signal.
FM - If FM reception is weak, fully extend the wire antenna and vary the position and
location of the antenna until you find the strongest signal.
Radio Station Presets
The unit allows you to store up to 10 AM and 10 FM stations for easier recall at any time.
Setting the Preset Stations
1. Tap the button to turn on the unit.
2. Tap the MODE button to select the AM or FM radio mode.
3. Tune to the radio station you want to store in memory by using manually tune or
automatically search method.
4. Press and hold the TIME SET/MEMORY/M+ button, the preset channel number
“P01” appears on display and blinks.
5. To select desired preset station number, tap the
TUNE
/
buttons.
6. To confirm preset location, tap the MEMORY button.
7. Repeat steps 3 to 6 to store other stations if necessary.
Notes:
-
There’s about a 10 seconds delay when programming, after 10 seconds, the unit
will automatically switch back to normal tuner mode if you have not tapped the
MEMORY button.
-
You can replace a preset station by overwriting and storing the new station
frequency in its place.
Recalling a Preset Station
1. Tap the button to turn on the unit.
2. Tap the MODE button to select AM or FM radio receiving mode.
3. To select desired preset channel, tap the MEMORY/M+ button repeatedly.
LISTENING TO NATURE SOUND
1. Press the Power
/MODE button to turn on the unit.
2. Tap the MODE button again to select Nature sound mode. Nature sound “N1” will show
in display for a few seconds before show normal clock.
3.
4. Press the nature sound repeat all button N.S. REPEAT to select all nature Sound in
repeat all play, display will show “
NA
” before show normal clock, all nature sound will
be play one by one repeatedly.
Press the nature sound selection button N. S. SELECT to select different Nature
Sound.
N1
(Ocean)
N2
(Rain Forest)
N3
(White Noise
)
N4
(Campfire)
E-7
