OPERATING INSTRUCTIONS
SETTING THE CLOCK
When you connect the radio to an AC outlet for the first time the clock display will begin
flashing "12:00". The flashing will stop when you set the time.
1. If clock display is not flashing, press and hold the TIME SET button in unit standby
mode, display will start flashing to enter clock set mode. Tap the HOUR button
repeatedly to set the correct hour.
setting.
Press and hold the button for fast advance
2. After hour set, tap the MINUTE button repeatedly to set the correct minute. Press
and hold the button for fast advance setting.
3. Tap the TIME button to finish clock setting. If you do not tap the TIME button within
10 seconds, the unit will automatically save the setting and exit the time set mode.
E-6
.
Note:
The PM INDICATOR is located in the top left corner of the clock display. Make sure
you check that the PM indicator is set correctly for AM or PM. If the PM indicator is
'On', the time displayed is "PM". If the PM indicator is Off, the time displayed is "AM ".
DIMMER OPERATION
Press and hold the SNOOZE/DIMMER button to change the display brightness from
bright to dim, or dim to bright.
Note: The DIMMER function is not available when the Alarm is sounding or when the
Snooze mode is activated.
LISTENING TO THE RADIO
Radio Tuning
1. Press the Power
/MODE button to turn on the unit.
2. Tap the MODE button again to select AM or FM radio. Radio frequency will show
in display.
3. To manually tune to a desired station, repeatedly tap the
TUNE
/
buttons.
4. To automatically search for stations with strong signals, press and hold either the
TUNE
or TUNE
button until the frequency digits on display begins to scan then
release the button, the tuner will stop on the first strong station it finds.
5. Press the VOLUME UP (+) and VOLUME DOWN (-) button to the desired listening
level.
6. When you have finished listening, press and hold the button to turn the radio
off.
Notes:
Manual tune to select weaker stations that might be skipped during automatic
tuning.
-
