background image

 

2

 
13. Refer all servicing to qualified service personnel. Servicing is required when 

the apparatus has been damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects have fallen into the 
apparatus, the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped. 

14. This apparatus shall not be exposed to dripping or splashing water and that 

no object filled with liquids such as vases shall be placed on the apparatus. 

15. The apparatus shall not be exposed to dripping or splashing and that no 

objects filled with liquids, such as vases, shall be placed on apparatus. 

16. Main plug is used as disconnect device and it should remain readily 

operable during intended use. In order to disconnect the apparatus from the 
mains completely, the mains plug should be disconnected form the mains 
socket outlet completely. 

17. Battery shall not be exposed to excessive heat such as sunshine, fire or the 

like. 

18. The marking information is located at the back of apparatus. 

19. CAUTION 

Danger of explosion if battery is incorrectly replaced. Replace only with the 
same or equivalent type.

 

 

 
 
 

 
CAUTION:                                                                               
TO PREVENT ELECTRIC SHOCK, 
MATCH WIDE BLADE OF AC PLUG TO WIDE SLOT.  FULLY INSERT. 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

Summary of Contents for JCR-208












Reviews: