JCD2010
6
BASIC OPERATION
Power On/Off ( )
Press the button (1) to turn the unit ON or OFF.
Volume Control
To change the volume level, rotate the
VOL+/-
control (4). When the volume is adjusted, the
volume level is shown on the display panel as a number ranging from 00 (lowest) to 63
(highest).
Mute
Press the
MUTE
button (8) on the control panel to mute the audio output. Press
MUTE
again to
restore the audio output to the previous level.
Mode
Press the
MODE
button (5) on the control panel to select a different mode of operation, as
indicated on the display panel. Available modes include Radio, CD, and AUX (optional
Auxiliary Input).
Auxiliary Input
To connect a portable audio device, insert a standard 3.5mm (audio line output or headphone
output from your portable CD/MP3/iPod or other media player) into the front "AUX IN" jack.
Press the
MODE
button (5) to change to AUX mode. Press
MODE
again to cancel AUX mode
and return to previous mode.
Audio Menu
Press the
VOL+/-
control (4) on the control panel to access the Audio Menu. You can navigate
through the Audio Menu items by pressing the volume control button repeatedly. Once the
desired menu item appears on the display, adjust that option by turning the volume control
knob within 5 seconds. The unit will automatically exit the Audio Menu after five seconds of
inactivity. The following menu items can be adjusted.
Volume Level
Use the button to adjust the Volume level from “00” (lowest) to “63” (highest).
Bass Level
Use the button to adjust the Bass (BA) level range from “-7” to “7”.
Treble Level
Use the button to adjust the Treble (TR) level range from “-7” to “7”.
Balance
Use the button to adjust the Balance (BL) between the right and left speakers from “9L” (full
left) to “9R” (full right). “BL:0” represents an equal balance between the right and left speakers.
Fader
Use the button to adjust the Fader (Fd) between the rear and front speakers from “9R” (full
rear) to “9F” (full front). “Fd:0” represents an equal balance between the front and rear
speakers.
Clock Set
•
In clock display mode, press
VOL+/- (PUSH SEL)
control (4) for 2 seconds to enter clock
adjustment mode.
•
While the hour is flashing, rotate the
VOL+/-
control (4) to adjust the value as follows:
•
USA Tuning Mode: 1-12
•
EURO Tuning Mode: 00 - 23
•
Press the
VOL+/-
control to confirm the hours.
•
While the minutes are flashing, rotate the volume control to change the value
(from 00 to 59).
•
Press the
VOL+/-
control for 2 seconds to confirm the time and exit clock adjustment
mode.
Reset
Use a pencil or any non-metallic object to
press and hold
the
RESET
button (17) for five
seconds to reset the main unit. The unit will return to the factory default settings. The reset
button should be activated for the following reasons:
•
initial installation of the unit when all wiring is completed
•
function buttons do not operate
•
error symbol on the display
Preset Equalizer (EQ/LD)
Press the
EQ/LD
button (15) to select from the following preset equalizer functions: CLAS
(classic) > ROC (rock) > POP > DSP (OFF). When “DSP” is selected, the EQ function is
controlled by the user bass/treble settings.
Loudness (EQ/LD)
Press and hold the
EQ/LD
button (15) to toggle loudness on/off. When listening to music at low
volumes, this feature will boost the bass and treble ranges to compensate for the
characteristics of human hearing.
1
4
6
5
2
3
8
10
16
9
11
12
13
14
21
15
20
19
18
7
17
