Jensen Heavy Duty, Installation And Operation Manual

Page: 8 / 21

JHD916BT
6

Press the
▲ or ▼ buttons (8, 11) to adjust the selected digit.

Rear AUX Enable (On/ Off)

Preset-Only Tuning (On / Off)

Sirius XM Settings Menu (only appears when Sirius XM tuner is connected and in Sirius
XM mode)

Clock Autoset (On/Off): Sets clock based on SXM data

Time Zone1 (Atlantic / Eastern / Central / Mountain / Pacific / Alaska)

Daylight Saving Time (Yes/No)

Set Lock Code: _ _ _ _

Locked Channels: List of Channels (Locked / Unlocked)

SXi Firmware Version

Weather Alert Configuration

Min Alert Level (All / None / Warnings / Watches)

Auto-
On Enable (Yes/No): Select “Enabled” to turn on the radio when NOAA alerts
are issued. This function only works when the +12V switched is on.

Alert Volume (Select Volume Level 0-40)

Clear SAME Codes <ENTER>

SAME Code 1: _ _ _ _ _ _

SAME Code 2: _ _ _ _ _ _

SAME Code 3: _ _ _ _ _ _

SAME Code 4: _ _ _ _ _ _

SAME Code 5: _ _ _ _ _ _

SAME Code 6: _ _ _ _ _ _

SAME Code 7: _ _ _ _ _ _

Battery Alarm (On/Off)

Battery Auto-Off (On/Off)

Bluetooth Setup

BT: (On/Off)

BT HFP Volume: (Select Volume Level 0-40) Hands-free call volume

BT Device List <Enter>: View a list of devices paired with the unit
•
Lock
•
Connect / Disconnect
•
Delete

BT Pair <Enter to enable>

BT Auto Answer: (On/Off)

Reset System Defaults <ENTER>: Press the INFO/ENTER button (9) to return the unit to
factory default set up values.
Auxiliary Input
To access an auxiliary device:
1. Connect the portable audio player to
the 1/8” AUX IN on the front panel (14)
2. Press the MODE button (3
) to select “Auxiliary” mode.
3. Press MODE
again to cancel “Auxiliary” mode and go to the next mode.
Liquid Crystal Display (LCD)
The current frequency and activated functions are shown on the LCD panel.
NOTE: LCD panels may take longer to respond when subjected to cold temperatures for
an extended period of time. In addition, the visibility of the characters on the LCD may
decrease slightly. The LCD display will return to normal when the temperature increases
to a normal range.
Setting the Clock
To set the clock to display the current time, turn the vehicle ignition on and turn the radio on.
Enter the system menu an
d adjust the clock by selecting the “Set Clock” menu item.

Press the INFO/ENTER button (9) to view the clock set screen.

Press the
▲ or ▼ buttons (8, 11) to adjust the selected digit.
Press the
◄◄ or ►► buttons (17, 10) to move to the next digit. When no adjustment is made
for five seconds, the time will become set and normal operation will resume.
Scroll
When the information is too long to be displayed on the LCD, press the DISPLAY/SCROLL
button (16) to view the entire title. The information will scroll twice and then return to abbreviated
text.