JHD916BT
11
Satellite Signal Strength
The display will indicate satellite reception strength as shown below.
Signal Strength
Strength Display
No Signal
Weak
Good
Excellent
Channel Lock
Access Channel Lock through the System Menu under the “SiriusXM Satellite Radio” menu. See
“System Menu” on page 5.
1.
Select “Set Lock Code” and press the
INFO/ENTER
button (9).
2.
Enter t
he default lock code of “0000”. To set the lock code:
a.
Press the
◄◄ or ►► buttons (17, 10) to enter the first digit of the default code.
b.
Press the
INFO/ENTER
button to move to the next digit.
c.
Repeat above steps to enter all 4 digits of the default code.
d.
Press the
◄◄ or ►► buttons (17, 10) to enter the first digit of the new code.
e.
Press the
INFO/ENTER
button to move to the next digit.
f.
Repeat above steps to enter all 4 digits.
g.
Repeat above steps to confirm the new code.
3.
After setting a new four digit code, you can lock channels by entering the “Locked
Channels” menu.
4.
Upon entering the Locked Channels list, you will be prompted to enter your four digit code.
a.
Press the
◄◄ or ►► buttons (17, 10) to enter the first digit.
b.
Press the
INFO/ENTER
button to move to the next digit.
c.
Repeat above steps to enter all 4 digits.
5.
After entering the code, you can navigate the list using the
◄◄ or ►► buttons (17, 10) to
highlight the channels.
6.
Press the
INFO/ENTER
button to Lock (indicated by a icon) or Unlock the
selected channel.
Reset SiriusXM Channel Lock Code
If you forget your Parental Control lock code, use the following directions to reset the code to the
default “0000”. Resetting the lock code will not affect the locked channels list.
1.
In SiriusXM mode, tune to CH-0
2.
Tune the volume to 0.
3.
Press the
POWER
button (1)
to power off the unit.
4.
With power off,
press and hold
the
POWER
button to lights on the LCD.
5.
Press the
3
from the number buttons (15) to lights off the LCD after several seconds.
6.
Press the
POWER
button to power on the unit.
7.
The lock code has now been reset to “0000”
