background image

1

4

3

2

SEL

MUTE

MONO

DISP

SCAN

AS/PS

BAND

LOUD

CD

CH

CH

FM1

FM1

BAS

BAS

STE

REO

CR560X

REL

®

1

VOL

+

VOL

-

2

3

4

5

6

®

Installation

How to Install the CR560X AM/FM
Stereo Radio/Cassette Tape Player

Contents

Installation

...................................

2

Before You Begin Installation ........ 2

Tools and Supplies Needed ........... 2

Speaker Requirements .................. 2

Adapters for Easier
Installation ..................................... 2

• Connections ............................... 3

• Crimp Connections .................... 3

• Upgrading your System ............. 3

Disconnect Battery ........................ 4

Remove Old Radio ........................ 4

Install Half-sleeve .......................... 5

Wiring

.............................................

5

• Fuse Adapters ........................... 5

• Cars with a Single

Speaker Wire ............................. 5

Wiring with a Wiring Adapter ......... 6

Connect Wires ............................... 6

Install Wiring Inside the Car .......... 6

Wiring Diagram–Advanced
Installation ..................................... 7

Testing

..........................................

8

Reconnect Battery ......................... 8

Test Power Wiring .......................... 8

Test Antenna Connection .............. 8

Test Memory Wiring ....................... 8

Set the Clock ................................. 8

Test Speaker Connections ............ 9

Final Installation ........................... 10

Final Installation–ISO-DIN ........... 10

Troubleshooting

.......................

11

Removing Radio from Dash ........ 11

• Securing Wires ........................ 11

Specifications
and Warranty ........................ 12

 Technical  Assistance

For technical assistance with the installation of the
CR560X, call 1-800-323-0221.

Welcome!
What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this book
clear and easy to follow.

For your Jensen stereo to work right, it must be installed
correctly. This manual will show you how to install your new
stereo like a pro. It's a good idea to read all of these
instructions before you begin the installation. Most
installations are straightforward and can be handled by a
do-it-yourselfer with the right tools, patience, and the ability
to follow instructions. But, do-it-yourself installation isn't for
everyone. If you still don't feel confident after reading this
book, consider turning the installation job over to someone
better suited to it.

Warranty Service
If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt
with the product.

Install
half-sleeve
(page 5)

Final
Installation
(page 10)

Connect and
test radio
(pages 8 and 9)

Install wiring
(pages 6 and 7)

5588 CR560X_EIN.p65

2/29/00, 10:46 PM

1

Summary of Contents for CR560X













Reviews: