7
How to connect AL2000 via WPS?
WPS is a standard for easy and secure setup and connection without the need of enter any
encryption key.
A WPS connection is done by pushing a button on both devices, or enter a pin code.
1
. Please make sure that the WPS function are enabled in your wireless router. See FAQ/manual for your
router to see how that is done.
2. Press the WPS button for 2 seconds on your wireless router and then the same on AL2000.
3. The WPS LED on your AL2000 will flash as long while connecting.
4. The WPS LED will go off when an WPS connection are successful.
5. If the WPS connection is successfull the 2.4GHz or 5GHz LED will lit (depending on which of the
frequencies you connected to).
An WPS connection will take about 1 minute to complete.
6. AL2000 is now ready for use.
The repeated network will have the same encryption key as the existing, but the network name
will have
_2EX
added to it.
i
2
1
Internet
3
4
5VDC
ON / OFF Reset/WPS
WiFi
2
1
Internet
3
4
5VDC
ON / OFF Reset/WPS
WiFi
AirLink00868
AirLink00868_2EX
FAQ - frequently asked questions
FAQ - frequently asked questions
