Jensen A540 DiXL D-1703 E, Operating Instructions Manual, Page: 37 / 92

KTR Kupplungstechnik
GmbH
D-48407 Rheine
C L A M P E X
®
K T R 4 0 0
m o u n t i n g i n s t r u c t i o n s
KTR-N
sheet:
edition: 40818 E
2
2
Gezeichnet: 06.09.01 Sha/Hg Ersatz für: KTR-N 40840 Verteiler
Urheberschutz
gemäß DIN 34
Geprüft: 06.09.01 Sha Ersetzt durch: W K V VA M KC
The clamping set is generally delivered in assembled condition.
Tolerances, surfaces
A good rotating process is sufficient: Highest permissible tolerance:
Rz
≤
16
µ
m d = h8/H8 - shaft/hub
Components of CLAMPEX
®
KTR 400
Component Quantity Designation
1 1 front pressure ring (slotted)
2 1 back pressure ring (slotted)
3 1 external ring (slotted)
4 see catalogue cap screw DIN 912
picture 1: CLAMPEX
®
KTR 400
!
C A U T I O N !
Check the clamping set before the assembly, so that the slots of component 1, 2
and 3 are flush with each other.
!
A T T E N T I O N !
Plan a free space between the pressure ring in the back and the hub/shaft for a
later disassembly.
picture 2: free space
for the disassembly
Formula for calculation of the
free space x for the
disassembly:
2
) B B (
x
2 1
−
=
Dimensions for B
1
and B
2
see
CLAMPEX
®
catalogue.
!
A T T E N T I O N !
Dirty or used clamping sets must be disassembled, cleaned and afterwards oiled
with thin-bodied oil (e. g. Castrol 4 in 1 or Klüber Quitsch Ex) before the assembly.