INSTALLATION INSTRUCTIONS
Step # 19
Connecting the Game to AC outlet
Locate the power cable in the spare parts box and insert it into the
power switch of the game. Insert the other end into a properly rated
and grounded outlet.
DANGER
Check Box When This Step is Complete
Step # 20
Powering On the Game
Turn the power switch to ON. The game should start and run after the
computer goes thought its diagnostic process. This could take up to
two minutes while Windows loads.
Check Box When This Step is Complete
Step # 21
Adjusting the Volume
Once the game is loaded and running you can adjust the sound output
by opening the access door to the right of the player station. Inside
you will find the volume control. Please note that moving the dial in
the clockwise direction will increase the volume and the opposite will
decease the volume. If no sound is comming out please press the
mute button (circled) as the amplifier may be muted.
Check Box When This Step is Complete
ALWAYS INSPECT AND REPLACE DAMAGED
ELECTRICAL CORDS. DO NOT ATTEMPT TO USE OR
FIX A DAMAGED CORD
Jennison Entertainment Technologies
Rocket Wheel Service Manual
Page 18