Jenn-Air W10201609B Installation Instructions And Use And Care Manual Download Page 19

19

ASSISTANCE OR SERVICE

When calling for assistance or service, please know the purchase 
date and the complete model and serial number of your 
appliance. This information will help us to better respond to your 
request.

If you need replacement parts

If you need to order replacement parts, we recommend that you 
use only factory specified parts. Factory specified parts will fit 
right and work right because they are made with the same 
precision used to build every new appliance. To locate factory 
specified replacement parts in your area, call us or your nearest 
designated service center.

In the U.S.A. 

If the problem is not due to one of the items listed in the 
“Troubleshooting” section…

Call the dealer from whom your appliance was purchased, or call 
Jenn-Air at 1-800-688-1100 to locate an authorized service 
company. When calling, please know the purchase date and the 
complete model and serial number of your appliance. Be sure to 
retain proof of purchase to verify warranty status. 

If the dealer or service company cannot resolve your problem, 
write to:

Jenn-Air Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Web address: www.jennair.com

Or call: 1-800-688-1100

U.S. customers using TTY for deaf, hearing impaired or speech 
impaired, call: 1-800-688-2080

NOTE: When writing or calling about a service problem, please 
include the following information:

1. Your name, address and daytime telephone number.

2. Appliance model number and serial number.

3. Name and address of your dealer or servicer.

4. A clear description of the problem you are having.

5. Proof of purchase (sales receipt).

User’s guides, service manuals and parts information are 
available from Jenn-Air Brand Home Appliances, Customer 
eXperience Center.

In Canada

If the problem is not due to one of the items listed in the 
“Troubleshooting” section…

Call the dealer from whom your appliance was purchased, or call 
Jenn-Air at 1-800-807-6777 to locate an authorized service 
company. When calling, please know the purchase date and the 
complete model and serial number of your appliance. Be sure to 
retain proof of purchase to verify warranty status. 

If the dealer or service company cannot resolve your problem, 
write to:

Jenn-Air Brand Home Appliances

Customer eXperience Centre

1901 Minnesota Court

Mississauga, ON L5N 3A7

Web address: www.jennair.ca

Or call: 1-800-807-6777.

NOTE: When writing or calling about a service problem, please 
include the following information:

1. Your name, address and daytime telephone number.

2. Appliance model number and serial number.

3. Name and address of your dealer or servicer.

4. A clear description of the problem you are having.

5. Proof of purchase (sales receipt).

User’s guides, service manuals and parts information are 
available from Jenn-Air Brand Home Appliances, Customer 
eXperience Centre.

Accessories

NOTE: Instructions are included with each kit.

For model series JXDR7301V

30" (76.2 cm) one-piece trim:

Part Number W10187288 (black)

For model series JXDR7361V

36" (91.4 cm) one-piece trim:

Part Number W10187290 (black)

Summary of Contents for W10201609B









































Reviews: