16021730 Rev. 0
26
Tab
Tab
Figure 1
7. While lowering the light shield pull forward to
remove the shield from the rear mounting
screws.
8. Remove the rear light shield mounting screws.
9. To remove the air diffuser, remove the four
mounting screws shown.
10.Disconnect the auto damper stepper motor
electrical quick disconnect.
Mounting Screw
Mounting Screw
Figure 2
11. Remove the auto damper stepper motor bracket
mounting screws.
(See figure 2).
Figure 3
12.Remove the evaporator cover mounting screws.
(See figure 3).
13.Disconnect the evaporator fan motor remove the
evaporator cover assembly.
Disconnect
Drain Tube
Heater
Hose Clamp
Figure 4
14.Remove the drain tube hose clamp. Disconnect
the plastic drain tube hose from the drip pan
elbow. Disconnect the drain tube heater. (See
figure 4)
15. Disconnect the drain tube and drip pan heater
wire harness quick disconnects.
