7
INSTALLATION AND DOOR CLOSING
Your wine cellar has four leveling legs. If your wine cellar
seems unsteady or you want the door to close more
easily, adjust the wine cellar’s tilt using the instructions
below.
1.
Plug into a grounded 3 prong outlet.
2.
Move the wine cellar into its final location.
3.
Turn the leveling legs to the right to lower the wine
cellar, or turn the leveling legs to the left to raise it. It
may take several turns of the leveling legs to adjust
the tilt of the wine cellar.
NOTE:
Having someone push against the top of the
wine cellar takes some weight off the leveling legs.
This makes it easier to adjust the leveling legs.
4.
Open the door and check that it closes as easily as
you like. If not, tilt the wine cellar slightly more to the
rear by turning both front leveling screws to the right.
It may take several more turns, and you should turn
both leveling legs the same amount.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move and install wine cellar.
Failure to do so can result in back or other injury.
When Moving Your Wine Cellar:
Your wine cellar is heavy. When moving the wine cellar for
cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull
the wine cellar straight out when moving it. Do not wiggle or
“walk” the wine cellar when trying to move it, as floor
damage could occur.
