background image

8

Complete Installation

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.
4. For oven use and cleaning, read the Use and Care Guide.

Check Operation of Lower Oven

1. Turn power on. 
2. At first use, set up the language, regional settings, clock, date 

and screen appearance. For more details, read the Use and 
Care Guide.

3. Press OVEN.
4. Touch BROIL.

5. Set the temperature.
6. Touch START. 

If oven(s) does not operate, check the following:

Household fuse is intact and tight; or circuit breaker has 
not tripped.

Electrical supply is connected.

See “Troubleshooting” section in the Use and Care Guide.

7. When oven has been on for 5 minutes, feel for heat.

If you do not feel heat or if an error message appears in the 
display, turn off the oven and contact qualified technician.

8. Touch CANCEL OVEN.

Check Operation of Microwave Oven

1. Fill a microwave-safe container with 1 cup (250 mL) of water 

and place container inside microwave oven. Close door firmly.

2. From the main menu press microwave or open microwave 

oven door.

3. Touch COOK.
4. Set power level, temperature and cook time to “2:00” minutes.
5. Touch START.

If microwave oven does not operate, check the following:

Household fuse is intact and tight; or circuit breaker has 
not tripped.

Electrical supply is connected.

See “Troubleshooting” section in the Use and Care Guide.

When display reads “1:00” minute, open microwave oven 
door. The microwave oven should stop cooking. Close door 
firmly. The interior microwave oven light should turn off.

6. Touch START to resume a preset cycle. The microwave oven 

should begin cooking, and the microwave oven interior light 
should be on. Let microwave oven complete cooking time. 
Tones will sound at the end of the cooking time, and the 
microwave oven will shut off.

7. Open microwave oven door and slowly remove container. 

Water in container should be hot. To set the clock and other 
oven functions, refer to the Use and Care Guide.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use 
and Care Guide or contact the dealer from whom you purchased 
your built-in and microwave ovens.

Summary of Contents for JMW3430WS

















Reviews: