COMPONENT ACCESS
Microwave Combination Wall Ovens
n
4-15
Convection Element, Fan, Cap Nut and spacer
The electrical component terminals for the Fan Mo-
tor, Convection Thermo and element are shown
To remove the Fan Motor, you need to remove the
Fan Blade (the fan blade has a “D” shaft cutout on
the fan blade for easy re-assembly).
The motor is held in place by the fan Blade cap nut
and three retainer clips that fit into the motor tab
cutout in the mounting panel. Drop the fan clips
into the mounting holes and turn until all three mo-
tor clamps are in place.
The broil element located inside the oven cavity is
held in place by two retainer nuts (shown by arrows).
The Broil electrical terminals can be seen right next
to the mounting screws.
Summary of Contents for JMW2430D
Page 38: ...2 16 n Microwave Combination Wall Ovens OPERATION NOTES...
Page 60: ......
