COMPONENT ACCESS
Microwave Combination Wall Ovens
n
4-7
REMOVING THE OVEN SHUTDOWN
THERMAL FUSE FROM THE MAIN OVEN
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Remove two mounting screws and remove the fuse.
Note: Before replacing this fuse make sure you
know what condition made this fuse fail and correct
it.
A perforated cover is mounted in place with three
screws. Remove the screws and bend the cover
upward
At the back of the oven remove the lower oven
back service panel. Locate the bake element ter-
minals near the bottom of the oven (Red Wires).
Remove the two electrical connections from the
element.
REMOVING THE HIDDEN BAKE ELEMENT
Under the cover you will locate and remove two
bake element mounting screws.
Between the bake element terminals is a rectangu-
lar clip (location pointed out by arrow) that needs
to be bent upward far enough to free the element
from the housing.
Note:
when pulling the element out, there will be
some resistance because of the element coils. Lift
the coils upward to free the element.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Summary of Contents for JMW2430D
Page 38: ...2 16 n Microwave Combination Wall Ovens OPERATION NOTES...
Page 60: ......
