JENN-AIR
®
DETAILED PLANNING DIMENSIONS
JENN-AIR
®
DETAILED PLANNING DIMENSIONS
2 of 3
8560BdZw815
IMPORTANT:
Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information.
Refer to the Installation Guide
before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
®
appliances are appropriately UL, CUL or CSA approved.
D*
G
E
A
B
B
I
K
J
H
C
e
F
Side
Cabinet
H
D*
G
I**
K
J**
E
C
e
B
B
H
F
H
Side
Cabinet
A
D*
G
I**
K
J**
E
C
e
B
B
H
F
H
Side
Cabinet
A
MODEL #
JEC3536B
in
cm
A
Width of combustible area above
cooking surface (min.)
36
91.4
B
Width from cooktop to fixed wall or
other combustible material (min.)
1
2.5
C
Width to outer edge of outlet (max.)
9
23.0
D*
Height to bottom of uncovered wood or
metal cabinet above cooking surface (min.)
30
76.2
E
Height to bottom of uncovered wood or
metal cabinet (min.)
18
45.7
F
Height to top edge of outlet (min.)
7
17.8
G
Depth of upper cabinet
13
33.0
H
Depth from cutout to wall (min.)
1
2.5
I
Width of cutout
35
1
⁄
2
90.2
J
Depth of cutout
20
1
⁄
2
52.0
K
Depth from cutout to front of countertop
2
5
⁄
8
6.7
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal
cabinet is covered by not less than
1
⁄
4
" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for
dimensional clearances above the cooking surface.
OPENING/CLEARANCE DIMENSIONS
FRONT VIEW
TOP VIEW
SIDE VIEW
36" ELECTRIC RADIANT COOKTOP
JEC3536BS – 36
7
⁄
16
" x 5
5
⁄
16
" x 22
3
⁄
16
"
JEC3536BB – 36
5
⁄
16
" x 5
5
⁄
16
" x 21
11
⁄
16
"
ELECTRICAL REQUIREMENTS
A 3-wire or 4-wire, single phase, 120/240 volt, 60 Hz., AC only electrical
supply is required on a separate, 40-amp circuit fused on both sides of
the line. 48" (121.9 cm) of
1
⁄
2
" (1.3 cm) I.D. flexible cable is provided.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout.
• If cabinet has a drawer, allow a 5
1
⁄
2
" (14.0 cm) minimum clearance
between countertop and top of drawer.
COOKTOP OVER SINGLE WALL OVEN INSTALLATION
REQUIREMENTS
• For approved model number combinations, refer to the under counter
label on the bottom of the cooktop burner box.
• To install a cooktop over a single wall oven, refer to page 3.
