manualshive.com logo in svg

Jenn-Air JBRFR24IGX, Install, Page: 24 / 116

Share
Download
Jenn-Air JBRFR24IGX Install Download Page 24

24

  I N T R O D U C T I O N

S I T E   P R E P

5 .   P R E - I N S TA L L AT I O N   C H E C K

Verify customer’s selected door style.

Remove all installation materials from  
the deli drawer.

Mark selected door style on templates and  
door depth gauges with a permanent marker.

Verify that the diagonal measurements  
of opening match.

Check design considerations document to  
verify panel and toe-kick dimensions, as well  
as gaps and overlays.

Check for correct join kits based on 
configuration, left/right side, hinge/non-hinge 
and installation order.

This helpful key tells you where you’ll be performing the steps in the following sections.  
Note that columns are installed and numbered from left to right.

I N S T R U C T I O N   K E Y

1

2

3

Perform the step on 
every column you  
are installing.  

1

2

3

Perform the step 
on the column 
highlighted in blue.

1

2

3

Perform the step on 
the furniture.

1

2

3

Perform the step 
on a part that is not 
attached to a column, 
such as a door panel 
or toe-kick.

Summary of Contents for JBRFR24IGX





















































































































Reviews:

No comments