manualshive.com logo in svg

Jenn-Air JBRFR24IGX, Install, Page: 23 / 116

Share
Download
Jenn-Air JBRFR24IGX Install Download Page 23

I N T R O D U C T I O N  

23

 

S I T E   P R E P

4 .   C H E C K   T H E   E L E C T R I C A L

Column on a separate circuit. Outlet cannot  
be turned off by a switch.

Not using an extension cord.

Not using a GFCI protected outlet.

Electrical installed in the zones highlighted.  
(See graphic to the right.)

E L E C T R I C A L   R E Q U I R E M E N T S

Product Width/  
Alternate Electrical 
Zone Width "A"

Electrical Zone  
Width "B"

18" (45.7 cm)

14-1/2" (36.8 cm)

24" (60.1 cm)

20-1/2" (52 cm)

30" (76.2 cm)

26-1/2" (67.3 cm)

36" (91.4 cm)

32-1/2" (82.6 cm)

Electrical zone

Alt electrical zone 

(inside cabinet 

above column)

"A" width x 12" height

"A" width x 3-1/2" height

"B" width x  

6-1/2" height

Alt electrical zone

4-1/2"

1-3/4"

IF YOU HAVE QUESTIONS ABOUT YOUR ELECTRICAL SUPPLY,   

CALL A LICENSED, QUALIFIED ELECTRICIAN.

?

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, 
fire, or electrical shock.

WARNING

Summary of Contents for JBRFR24IGX





















































































































Reviews:

No comments