Assembling Your Blender
1. Carefully remove all blender parts from the packaging.
2. Place the blender power base on a solid, level surface.
3. Before first use, wash the pitcher jar, pitcher lid, pitcher
lid cap, pitcher gasket, blade base and base ring in hot,
soapy water. Rinse and dry.The pitcher jar is dishwasher
safe.The pitcher lid, base ring and blade base are all top-
rack dishwasher safe.
4. Carefully place the pitcher gasket over the blade base,
while keeping fingers away from the blades.
5.Turn the pitcher jar upside down.
6. Using caution, place the blade base and pitcher gasket
into the bottom opening of the pitcher jar.
7.Twist the base ring onto bottom of pitcher jar, making
sure it threads evenly and secures the pitcher gasket and
blade base in place.The base ring should be tightened
hand-tight onto the pitcher jar. Do not over-tighten.
8.Turn the pitcher jar right side up and place it on top of
the blender power base and turn clockwise to lock the
pitcher in place.
9. Insert the pitcher lid cap into the pitcher lid and tighten
it by turning clockwise. Place the pitcher lid onto the
pitcher jar.
10. Plug the detachable power cord into the blender power
base and a properly grounded 3-prong electrical outlet.
The blender is now ready to use.
Electrical Shock Hazard
– Plug into grounded outlet. Do not remove ground
prong. Do not use an adapter. Do not use an extension cord. Failure to follow these
instructions can result in death, fire or electrical shock.
WARNING
7
