Jenn-Air 720-0336, Instructions Manual

Page: 18 / 33

15
LIGHTING ILLUSTRATIONS
MAIN BURNER LIGHTING
1. Push and turn rear burner knob slowly to
“IGNITE / ON” setting, hold in until the
burner is lit up, continue to press and hold
for 15 seconds and release. You should
hear a “clicking” sound if the electronic
ignition system is working properly. The
burner should ignite within 4 seconds.
(if burner does not ignite follow match
lighting instructions on Page 16).
ROTISSERIE BURNER & SEARING
SIDE BURNER LIGHTING
1. Open the top cover or lid.
2. Push and turn the main burner control
knobs to the “IGNITE / HI” setting. Push
the control knob in until the burner ignites;
you should hear a “clicking” sound if the
electronic ignition system is working
properly. The burner should ignite within 4
seconds (if burner does not ignite follow
match lighting instructions on Page 16).
3. Once the burner ignites, adjust the
temperature level as desired.
2. Push and turn searing side burner knob to
“IGNITE / HI” setting, hold in until the
burner ignites. The burner should ignite
within 4 seconds. After ignition, continue to
press and hold for 15 seconds and release.
(If burner does not ignite follow match
lighting instructions on Page 16.)