17
USER SERVICING INSTRUCTIONS
NOTE: If the hood does not operate, check to see if the circuit
breaker has been tripped and that there is power to the unit.
Replacing the Fuse
1. Disconnect power
2. Using a flat-blade screwdriver, pry the fuse cover away from
the front panel of the downdraft hood.
3. Remove the fuse from the fuse holder by pushing it from the
bottom side with the screwdriver.
4. To avoid the risk of fire, replace the fuse with a 125 volt,
5 amp non-time delay fuse.
5. Push cover in until it locks into position.
6. Reconnect power.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
A. Fuse holder
B. Remote up/down switch connector
B
A
