the green LED flickers.
Long press test button: The host flashes, the light board of the interconnected device flashes, the
green LED flashes, and the buzzer "beep, beep, beep" beeps slowly.
Alarm: The light board flashes, the red LED flashes, the buzzer "beep, beep, beep" beeps slowly, the
host flashes, and the light board of the interconnected device flashes.
Silence: The main alarm device, the red LED flashes, (every 0.5s once, and waits 1s after three
times), and transmits the host and interconnection signals.Linked alarm equipment, the green LED
flashes, (every 0.5s once, and wait 1 second after three times). It will be restored after ten minutes of
silence.
Low battery: If it is below 5.2V, it will report low voltage, flash red LED once, beep once, light board
flash once, once for 60s. If the voltage is normal, the green light will flash once in 60s.
Product Maintenance:
Please test the product once a week to ensure that the product is operating normally.
Clean around the microphone sensor once a year to ensure that there are no coverings.
If a low-voltage alarm is issued, to protect your safety, please replace the battery.
If it fails to alarm, please adjust the adjustable knob at the bottom to "+".
