20
C. Connecting the Meter with the App
1. Prepare the 6179MB for Bluetooth connection.
Press the
“Power/BLE”
key for 2 seconds to turn on the
6179MB device. Press the
"Mode"
key to go to the measure
mode. Press and release the
“Power/BLE”
Key again to turn
on the 6179MB Bluetooth connection. The Bluetooth light on
the 6179MB will fast blink and it is ready for Bluetooth
connection.
2. Pair the 6179MB to the tablet.
a. Tap the “Settings” tab at the lower right of the App screen.
b. Tap the “Pair” button.
c. The tablet will search for any JENCO Bluetooth devices
within close proximity. When the App discovers and
displays the 6179MB, tap the “Connect” button.
d. Once the 6179MB is connected to the tablet, the device
Bluetooth light will blink slowly.
After the App has been installed, calibrate the 6179MB to
ensure the best reading quality.
D. Measurement Screen
The Measure Screen displays measurement readings,
measurement mode, temperature compensation mode,
parameter measurement curve, calibration information,
electrode health (App for pH only) and days since last
calibration.
