2 Installation
Installing the MIDI Upgrade to your Jen is a difficult task. But if you allow yourself plenty of
time (2 3 quiet hours) and follow these instructions then you should be able to do this task.
-
Some important advice:
–
DO NOT RUSH – take your time. Try to do this with no one else around. Put on some
-
quiet classical music. Put your mind in a relaxed state.
–
DO NOT FORCE ANYTHING – if something will not move or unscrew then stop and
work out why not. Do not apply all your strength, you will only break or snap a screw.
And that is bad mojo.
–
SPREAD YOURSELF OUT – use plenty of space to lay things out as you go. Give yourself
room to move.
The instructions are presented as tick lists. Follow each item in the list and tick them off as
you go. That way you can go away, and return to the installation and know exactly where
you were.
2.1 Preparation
As in all things, preparation is paramount. Before starting the installation please check
through the following sections to make sure you have the required tools, the required skills,
and a suitable work place.
2.1.1 Tools and Equipment You Will Need
You will need to provide some tools yourself. The following list sets out everything you will
need to complete this installation:
□
small cross head screwdriver
-
□
large cross head screwdriver
-
□
snipe nose pliers
-
□
pair of wire cutters
□
wire stripper
□
soldering iron
□
desolder pump
□
trimmer tool
□
22 SWG solder
□
permanent marker pen
□
3mm metal drill
□
15mm metal drill
□
electric drill & safety glasses
-
5
-