Jema Autolifte Euroline JA3000S-E, Installation, Operation And Maintenance Manual

Page: 3 / 20

WE ARE HERE TO SURPRISE!
3
1.
IMPORTANT SAFETY INSTRUCTIONS.
1.1 Important notices.
Jema Autolifte A/S provides the user with a 1 year warranty on the lift, if there is something wrong with the lift in service
conditions, we will repair or replace the product in accordance with the user's requirements. Jema Autolifte A/S assumes no
responsibility for incorrect installation and operation, overload operation, improper concrete pad (not conforming to the manual),
normal mechanical wear and inadequate maintenance. The warranty will be performed based on the type and serial number of
the equipment. Therefore, those obtainable by the users to the manufacturer when this demand.
This
mid rise “service” scissorlift is specially designed to lift vehicles weighing less than its maximum lifting capacity. It is not
allowed to use it for other purposes. If this is not respected, we will not assume liability to injury, accidental injury or damage to
the lift. Read this manual carefully before operating lift. This allows the person or property damage Without our professional
advice. it is not permitted to make changes in mechanics or control unit.
We recommend getting a proffessionel installer to mount and security approve lifts. Before starting
.
1.2 Qualified personnel.
1.2.1 Only these qualified staff, who have been properly trained, can operate the lift.
1.2.2 Electrical installation shall comply with local regulations and a qualified electrician must complete the connection.
1.2.3 People who are not trained are not allowed in the lifting area.
1.3 Danger notices.
1.3.1 Do not install the lift on an asphalt surface.
1.3.2 Read and understand all safety warnings before operating the lift.
1.3.3 Outdoor, sandblasting, undercoating and other environments that differ from general immortal auto mechanic tasks.
1.3.4 Keep hands and feet away from any moving parts. Keep feet clear of the lift when lowering.
1.3.5 Only qualified people, who have been properly trained, can operate the lift.
1.3.6 Do not wear unfit clothes such as large clothes with flounces, tirs, etc, which could be caught by moving parts of the
lift.
1.3.7 To prevent evitable incidents, surrounding areas of the lift must be clean and tidy.
1.3.8 The lift is simply designed to lift the entire vehicles, witch
has it’s maximum weight within the lifting capacity.
1.3.9 Always insure the safety proberly managed before any attempt to work near or under the vehicle.
1.3.10 Make sure to place the lifting pads to the positions as suggested by vehicle manufactures and when gradually lift the
vehicle to the desired height, operators should be certain that the vehicle will not slant, roll-over o
r slide in lifting
process.
1.3.11 Check at any time the parts on the lift to ensure the agility of moving parts and the performance of synchronization.
Ensure regular maintenance and if anything abnormal occurs, stop using the lift immediately and contact our dealers
for help.
1.3.12 Lower the lift to its lowest position and do remember to cut off the power source when service finishes.
1.3.13 Do not modify any parts of the lift
without manufacturer’s advice.
1.3.14 If the lift is going to be unused for a long time, users are required to:
Disconnect the power source and lubricate the moving parts with the correct lubrication.
Note: To protect the environment, any share disposed of according to current
regulations.