Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300
www.jemaautolifte.dk
Depressing pedal 19, rotate worktable clockwise until bottom tyre edge is placed on the wheel rim.
Should problems occur during fitting the tyre, e.g. jamming, release pedal and then lift it with your
foot.
Install tube.
Push top tyre edge opposite the foot into wheel rim recess and install top tyre edge on wheel rim,
proceeding in the same way as for the bottom edge.
Inflate tyre means of air gun with pressure gauge or by means of automatic inflator (description how
to operate the inflator will be found in the latter part of these instructions).
Unload arm and slide with knob 20.
Deflect column backwards with pedal 17
Open worktable jaws with pedal 16 and remove wheel from machine.
6. OPERATING CONSIDERATIONS
The worktable is driven by an electric motor through a worm gear, lubricated with Shell OMALAA
oil 680. After 4000 h operation (excluding breaks), clean the gear and change oil.
11
8. WARRANTY
Jema Autolifte provide 1 year warranty - All repairs and adjustments are to be made by the Jema Autolifte
Machine repairs during warranty period by users own means will result in cancellation of warranty.
